|
|
News & Reviews Article
| Title |
Pacific Coast Calcium Reactors |
| Author |
Stephen A. Weeks Jr
|
| Last Updated |
2014-12-20
|
| Abstract |
|
|
|
Pacific Coast Imports Calcium Reactor Instructions
Thank you for purchasing a quality product from Pacific Coast Imports. Below are instructions for proper installation and operation of your calcium reactor.
If you have any problems installing please contact us directly at: [email protected].
1. Open top of calcium reactor and add media to the chamber. Add media so that it is level just below the pump. DO NOT REMOVE ANY HOSES FROM THE PUMP.
2. Attach flow regulator with protective screen to the top of the unit.
3. Attach the enclosed hose to the calcium reactor drain hole and place it in the sump.
4. Fill bubble counter with water and attach it to the reactor. You may need to inject the bubble counter with water.
5. Attach the hose from bubble counter to the Co2 regulator and tank.
6. Plug in the calcium reactor pump; the water should be flowing through reactor now.
7. By tightening screw on the flow regulator, you will have the ability to control the amount of water entering and exiting the reactor. The water return to the sump should be a fast drip.
8. Turn on the Co2 and count the bubbles going into the bubble counter. There should be about 20 drips of Co2 per minute.
*Depending on system bio-load, you may need more or less Co2. You may determine this by testing your aquarium to adjust calcium and alkalinity levels.* Calcium levels should be roughly 400-450 ppm. Alkalinity levels should be roughly 9-12 dkh.
WARRANTY INFORMATION SHEET
This warranty covers all defects in workmanship or materials in the mechanical and electrical parts, arising under normal usage and care; in this product for a period of 12 months from the date of purchase provided you are able to present a valid proof-of-purchase. A valid proof-of-purchase is a receipt specifying the item, date purchased, and cost of item.
This warranty covers the original retail purchaser. During the applicable warranty period within normal use, we will repair or replace, at our discretion, any mechanical or electrical parts which prove defective, or replace the unit with a comparable model.
To obtain service under warranty, call (503) 982-6700.
THIS LIMITED WARRANTY DOES NOT COVER:
� All freight charges incurred in repair.
� Damages from improper installation.
� Defects other than manufactures defects.
� Damages from misuse, abuse, accident, alteration, lack of proper care and maintenance, or incorrect current or voltage.
� Damage from service from any unauthorized service personnel.
IMPORTANT NOTICE
PLEASE DO NOT RETURN TO THE VENDOR.
If you have any problems with the unit, contact Pacific Coast Imports for service.
PHONE: (503) 982-6700 or [email protected].
Please read operating instructions before using this product. Please keep original box and packaging materials in the event service is required.
|
|
| Products related to this article |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
